Canon PIXMA MP145

Reset manual "Ink Absorber Full" for pixma MP145 ( error message E27) actually , it's work as same as Canon MP 150 or MP 160, This is the step :

Canon MP145
with the printer powered off but connected to a power source , you must:
A) Press stop/reset button, and then press [ON/OFF] button to restart
B) Press [ON/OFF] again and then press twice the stop/reset button.
C) Press [ON/OFF] & Stop/reset button together, this time to enter
the repair status and power lights will be green,
D) Press stop/reset button 4x and warning lights will be go out
in [ON/OFF]button.
E) Turn off the printer.( it must be turn off) and then turn it on again.
Use with your own risk , i'll try this way and my Pixma MP145 not
blink again.

The number of the Reset
button pressing
LED Function Remarks
0 time Green Power off

1 time Orange Service pattern print
2 times Green EEPROM print
3 times Orange EEPROM reset
4 times Green Waste ink counter reset

5) Unplug cable power. (for MP145 / MP150)
6) Turn Off Power. (for MP160)

Comments

ERROR CODE AND RESET CANON MP150 MP160

E9 The connected digital camera / video camera does not support Camera Direct Printing E14 The Ink cartridges whose destination are wrong E15 Ink cartridge is not installed E16 - Ink remaining is unknown E16 -E19 Failed to scan head alignment sheet E22 Carriage error E23 Paper feed error E24 Purge unit error E25 ASF(cam) sensor error E26 Internal temperature rise error E27 Waste ink absorber full or platen waste ink absorber full E28 Ink cartridge temperature rise error - E29 EEPROM error E33 Paper feed position error E35 15 USB Host VBUD overcurrent error - USB E37 17 Abnormal motor driver error E40 20 Other hardware error E42 22 Scanner error

Canon printer i850, i950, S600

Dear all reseter's Start with the printer OFF 1. Hold down RESUME and then hold down POWER 2. release RESUME 3. press RESUME twice, then release POWER 4. Let green light blink until printer is done futzing Select function with RESUME press POWER to execute: presses - light color - function Number of presses - light color - function 0 presses - green - Test print (or exit service mode on i960) 1 press - orange - EEPROM info print (plus grid nozzle diagnostic on i960) 2 presses - green - EEPROM initialize 3 presses - orange - Reset waste ink counter

Canon Service Support Tool

The SST startup screen appears. download Service Support Tool V.201 and STT Error list Download dowbload Service Support Tool V.163e download Service Support Tool V.173e

Search This Blog